https://www.cnhfprecision.com/news/6610.html
This article will introduce you in detail how to maintain your electric blender juicer so that your electric blender juicer can always be in the best condition.
1. Blade maintenance
The blade is the core component of the electric blender juicer, which directly affects the mixing effect and safety. Cleaning the blades regularly is a top priority in maintenance. First, turn off the power and remove the blade assembly, and thoroughly clean the food residue around the blade with warm water and dish soap. Be careful to use a soft brush to gently scrub the blade surface to avoid scratches. After cleaning, rinse with clean water and dry, wait until completely dry before installation.
2. Container maintenance
Wash the inside and outside of the container with warm water and dish soap, making sure there are no residues or stains. Use a soft brush to clean the bottom and edges of the container, paying attention to the corners and corners. After cleaning, rinse with clean water and dry, and finally dry or wipe with a soft clean cloth.
3. Seal maintenance
The sealing ring ensures that food does not leak out. Regularly check the wear of the sealing ring. If there is wear or aging, replace the sealing ring with a new one in time to ensure tightness. When cleaning the sealing ring, wash it gently with warm water and dish soap, and avoid using too strong detergents or high-temperature water. After cleaning, rinse with clean water and dry. You can apply cooking oil to extend the service life of the sealing ring.
4. Regular care and maintenance
In addition to daily cleaning, regular care and maintenance are key. Regularly check the working status of each component. If problems such as blade rust, container deformation or sealing ring aging are found, they should be dealt with promptly. Lubricate the blade bearings regularly to maintain the flexibility and stability of the blade and extend its service life.
Vivi
hf@hfinnovation.cn